| 供應商 | 北京汐源科技有限公司 店鋪 |
|---|---|
| 認證 | |
| 報價 | 面議 |
| 關鍵詞 | 漢高ABLESTIKJM7000導電膠 |
| 所在地 | 北京建國路15號院 |
9年
LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
揭陽泰羅松MS939密封膠
面議
產品名：泰羅松 MS 939 密封膠,密封膠
漯河導電膠ssp2020燒結銀
面議
產品名：導電膠ssp2020,燒結銀,納米銀
珠海樂泰222螺紋膠鎖固膠
面議
產品名：樂泰222螺紋膠,鎖固膠
沈陽樂泰290螺紋膠固封膠
面議
產品名：樂泰290 螺紋膠,固封膠
包頭樂泰263螺紋膠
面議
產品名：樂泰263螺紋膠,鎖固膠
楊浦樂泰PC62三防漆
面議
產品名：樂泰 PC62 三防漆,電路絕緣漆