PTFE 耐高溫260℃ PTFE 熱收縮套管
應用
PTFE熱收縮套管由聚四氟乙烯（PTFE）材料制成，具有耐高溫（260℃）、耐腐蝕、高絕緣、機械強度佳等特性。其廣泛用于電子、計算機、電熱、航天、軍事、通訊等重要科技工業，如微型變壓器等。通常用在液壓管道及其管道結合部位以保護管道不受腐蝕。由于它具有非常高的機械強度和極低的摩擦系數，所以是保護受力軸和軸相關產品的理想產品。
特性
?收縮比：1.7:1
?的的阻燃性
?耐高溫260℃
?的機械性能和耐化學腐蝕性能
?符合ROHS、REACH等環保規范
?顏色
?標準顏色：透明
操作溫度范圍
?連續使用溫度：-67℃～260℃
?低完全收縮溫度：350℃
符合標準
?SAE AMS-DTL-23053/12
性能指標
性能 指標要求 測試方法 典型值
縱向收縮率 ≤10％ ASTM D 2671 ≤5％
抗張強度 17.3MPa min ASTM D 638 ≥22MPa
斷裂伸長率 200％ min ASTM D 638 ≥300％
絕緣耐壓和擊穿 2500V,60sec,不擊穿 ASTM D 2671 通過
體積電阻率 1015??cm min ASTM D 876 ≥1016??cm
腐蝕性 無腐蝕 ASTM D 2671 無腐蝕
阻燃性 VW-1 UL224 通過
介電常數 2.1
摩擦系數 0.1
規格尺寸
規格 收縮前（mm） 完全收縮后（mm） 標準包裝
（m/條或m/卷）
AWG 公制 內徑（min） 內徑（max） 壁厚
30 Ф0.8 0.8 0.4 0.23+0.05 1.22/200
28 Ф0.9 0.9 0.5 0.23+0.05 1.22/200
26 Ф1.1 1.1 0.6 0.25+0.05 1.22/200
34 Ф1.2 0.2 0.7 0.25+0.05 1.22/200
22 Ф1.4 1.4 0.8 0.30+0.08 1.22/200
20 Ф1.5 1.5 1.0 0.30+0.08 1.22/200
18 Ф1.9 1.9 1.25 0.30+0.08 1.22/200
16 Ф2.3 2.3 1.6 0.30+0.08 1.22/100
14 Ф3.0 3.0 1.85 0.30+0.08 1.22/100
12 Ф3.8 3.8 2.3 0.30+0.08 1.22/100
10 Ф4.8 4.8 2.85 0.30+0.08 1.22/100
8 Ф6.1 6.1 3.6 0.38+0.08 1.22/100
6 Ф7.6 7.6 4.5 0.38+0.08 1.22/100
4 Ф9.4 9.4 5.7 0.38+0.08 1.22/50
2 Ф10.9 10.9 7.1 0.38+0.08 1.22/50
0 Ф11.9 11.9 8.8 0.38+0.08 1.22/50
其他規格尺寸可定制


PTFE 260℃ High-temperature PTFE Heat Shrinkable Tubing
Application
PTFE heat shrinkable tubing is made of PTFE with excellent high-temperature performance, chemical resistance, high insulation and excellent mechanical properties. Designed to provide insulation and mechanical protection in severe chemical and thermal environments. Widely used in electronic, aerospace, military and communication fields. Used to cover hydraulic hose and couplings to prevent contamination and corrosion. The high mechanical strength and extremely low coefficient of friction make it good for reducing damage to bearing shafts and similar applicationns.
Characteristics
?Shrink ratio: 1.7:1
?Excellent flammability
?High temperature resistant to 260℃
?Superior physical and chemical properties.
?ROHS and REACH compliant.
Color
?Standard color: Clear
Operating Temperature Range
?Operating temperature: -67℃～260℃
?Minimum fully recovery temperature: 350℃
Approvals
?SAE AMS-DTL-23053/12
Property
Property Requirement Test method Typical data
Longitudinal shrinkage ≤10％ ASTM D 2671 ≤5％
Tensile strength 17.3MPa min ASTM D 638 ≥22MPa
Elongation at break 200％ min ASTM D 638 ≥300％
Dielectric voltage withstand 2500V,60sec,no breakdown ASTM D 2671 Pass
Volume resistivity 1015??cm min ASTM D 876 ≥1016??cm
Copper corrosion No corrosion ASTM D 2671 No corrosion
Flammability VW-1 UL224 Pass
Dielectric constant 2.1
Friction coefficient 0.1
Sizes
Size As supplied (mm) After recovered(mm) Standard packing
(m/pc,m/roll)
AWG mm Inside diameter(min) Inside diameter max Wall thickness
30 Ф0.8 0.8 0.4 0.23+0.05 1.22/200
28 Ф0.9 0.9 0.5 0.23+0.05 1.22/200
26 Ф1.1 1.1 0.6 0.25+0.05 1.22/200
34 Ф1.2 0.2 0.7 0.25+0.05 1.22/200
22 Ф1.4 1.4 0.8 0.30+0.08 1.22/200
20 Ф1.5 1.5 1.0 0.30+0.08 1.22/200
18 Ф1.9 1.9 1.25 0.30+0.08 1.22/200
16 Ф2.3 2.3 1.6 0.30+0.08 1.22/100
14 Ф3.0 3.0 1.85 0.30+0.08 1.22/100
12 Ф3.8 3.8 2.3 0.30+0.08 1.22/100
10 Ф4.8 4.8 2.85 0.30+0.08 1.22/100
8 Ф6.1 6.1 3.6 0.38+0.08 1.22/100
6 Ф7.6 7.6 4.5 0.38+0.08 1.22/100
4 Ф9.4 9.4 5.7 0.38+0.08 1.22/50
2 Ф10.9 10.9 7.1 0.38+0.08 1.22/50
0 Ф11.9 11.9 8.8 0.38+0.08 1.22/50
Other sizes are available upon request.

查看全部介紹